Comp 800 Wing
Comp 800 Racing Wing Specifications:
Size: 12" chord width by 68" long, other non-standard lengths are available.
Weight: Approx. 7.5 lbs., excluding End Plates and Struts.
Downforce Range: 0 -600 LB at 100 mph*
Speed Rating: 240 mph
Construction: Proprietary carbon fiber/ epoxy construction with structural polyurethane foam core.
Finish: Clear Gelcoat or Grey urethane primer, ready to paint.
Strut Center Distance range: 18 to 44 inches
Strut Receivers (2): CNC machined from 6061-T6 aluminum with riveted and bonded stainless steel clevis plates.
Provide a fully articulated interface and pitch adjustment of 2 deg. per turn with all G-Stream Struts.
Strut Receivers are supplied unmounted and must be installed only after mounting the struts and determining strut center distance.
End Plates (2): 6061-T6 aluminum, clear anodized finish. Optional Carbon Fiber end pates are available at additional cost.
Wing Augmentation Devices -The Comp 800 Wing is designed to operate most efficiently without any augmenters on the trailing edge and these devices are not recommended.
* This is a calculated value, actual downforce will vary based on the shape of the
racecar's body and other aero devices used.